| Products > Test Equipment |
| AN8008 US $19, 9999count, 1uV, 0.01uA, 0.01Ohm, 1pF resolution meter |
| << < (152/172) > >> |
| tooki:
--- Quote from: Zimphire on July 15, 2018, 07:54:04 am --- --- Quote from: tooki on June 29, 2018, 07:04:21 pm ---Zimph, from MacNN forums, is that you?! :P Blast from the past!!! --- End quote --- Ack! PLZ don't ban me! --- End quote --- Hahaha I’m not an admin here. And you deserved it! ;) Anyway, nice to see a familiar face (well, username!). |
| lordvader88:
Wasn't there something very common missing on these like mA ability, just Amps ? |
| floobydust:
--- Quote from: lordvader88 on July 15, 2018, 11:31:49 pm ---Wasn't there something very common missing on these like mA ability, just Amps ? --- End quote --- Full featured DMM's using this chipset have a fouth input jack: COM, V, mA/uA, A AN8008 has three and is missing the low mA range, it has uA, high mA + A. So it reads: 0-99.99uA at the V jack with 100R shunt. 0-999.9uA at the V jack with 100R shunt. 0-999.9mA at the A jack with 0.01R shunt 0-9.999A at the A jack with 0.01R shunt Missing is the 9.999mA/99.99mA range with 0.99R shunt. So you can only get 0.1mA resolution on mA measurements. Also, it cannot measure past 9.999MEG ohms :-- |
| Fungus:
--- Quote from: lordvader88 on July 15, 2018, 11:31:49 pm ---Wasn't there something very common missing on these like mA ability, just Amps ? --- End quote --- Yes. They don't have a range in the 10mA area. They jump straight from uA to A. |
| exe:
I like having only three jacks -- that's convenient for me. But I'd love to have an audible warning if plug not in the right socket. |
| Navigation |
| Message Index |
| Next page |
| Previous page |