Products > Test Equipment
AN8008 US $19, 9999count, 1uV, 0.01uA, 0.01Ohm, 1pF resolution meter
<< < (153/172) > >>
stj:

--- Quote from: exe on July 16, 2018, 10:54:40 am ---I like having only three jacks -- that's convenient for me. But I'd love to have an audible warning if plug not in the right socket.

--- End quote ---

you do, it makes a bang or large crack sound!  >:D
exe:

--- Quote from: stj on July 16, 2018, 12:25:33 pm ---you do, it makes a bang or large crack sound!  >:D

--- End quote ---

Considering the DMM itself costs just a bit more than a good HRC fuse, that's fine with me :). A single-use DMM...

PS could you remind me why it should bang? I thought it has fuses on all ranges...
JanJansen:
How long does it take before a 99.999 counts meter is to be released for this price ?
exe:

--- Quote from: JanJansen on July 16, 2018, 02:30:13 pm ---How long does it take before a 99.999 counts meter is to be released for this price ?

--- End quote ---

You mean a 5-digit DMM for $15? Well, if you only care about number of digits it's not a problem at all :D. A 16-bit sound DAC with some oversampling will do it... But precision will suffer.
wolferl1210:
I want to make the mods to my AN8008 according to the info at:
https://hackaday.com/2017/11/24/a-few-caps-for-a-faster-multimeter/

It's the first time that I re-solder SMD, but a do have a lot of experince in soldering.
I use a solder ATTEN ST-80 station with temp setting, so what temp should I use for the 0805 caps?
Is the tip (attached pic) OK for that job?

Thanks for your advise in advance!

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod