Products > Test Equipment

AN8008 US $19, 9999count, 1uV, 0.01uA, 0.01Ohm, 1pF resolution meter

<< < (153/172) > >>

stj:

--- Quote from: exe on July 16, 2018, 10:54:40 am ---I like having only three jacks -- that's convenient for me. But I'd love to have an audible warning if plug not in the right socket.

--- End quote ---

you do, it makes a bang or large crack sound!  >:D

exe:

--- Quote from: stj on July 16, 2018, 12:25:33 pm ---you do, it makes a bang or large crack sound!  >:D

--- End quote ---

Considering the DMM itself costs just a bit more than a good HRC fuse, that's fine with me :). A single-use DMM...

PS could you remind me why it should bang? I thought it has fuses on all ranges...

JanJansen:
How long does it take before a 99.999 counts meter is to be released for this price ?

exe:

--- Quote from: JanJansen on July 16, 2018, 02:30:13 pm ---How long does it take before a 99.999 counts meter is to be released for this price ?

--- End quote ---

You mean a 5-digit DMM for $15? Well, if you only care about number of digits it's not a problem at all :D. A 16-bit sound DAC with some oversampling will do it... But precision will suffer.

wolferl1210:
I want to make the mods to my AN8008 according to the info at:
https://hackaday.com/2017/11/24/a-few-caps-for-a-faster-multimeter/

It's the first time that I re-solder SMD, but a do have a lot of experince in soldering.
I use a solder ATTEN ST-80 station with temp setting, so what temp should I use for the 0805 caps?
Is the tip (attached pic) OK for that job?

Thanks for your advise in advance!

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod