| Products > Test Equipment |
| Analog vs digital X-Y mode |
| << < (7/12) > >> |
| Rich@RohdeScopesUSA:
--- Quote from: chirality on May 21, 2018, 10:56:07 pm ---I'm curious, of all the <$2000 DSOs on the market as of 2018, which make/models do XY-mode the best (by best, I mean most analog-like)? Keysight? Tek? Rhode & Schwarz? Siglent? --- End quote --- There are several videos of the RTB2000’s XY mode available from 3rd party reviewers, including one pretty thorough one here: Mikes Electric Stuff has also played around with it a bit with some unique combinations: https://mobile.twitter.com/mikelectricstuf/status/959025632830197761 -Rich |
| nfmax:
Last year I had occasion to use XY mode on my Keysight MSO-X 2024A, to characterise the transfer function of an opto-isolator circuit (tweaking for best noise margins with lowest power dissipation). It worked beautifully, including a simulated 'spot' following the signal - which was a triangle output from the built-in generator. First time I'd ever tried XY mode, though! |
| tautech:
--- Quote from: tautech on May 22, 2018, 12:36:33 am --- --- Quote from: chirality on May 22, 2018, 12:24:30 am --- --- Quote from: tautech on May 21, 2018, 11:25:46 pm ---In a few days we'll know how well the SDS1*04X-E XY mode has been improved as it's just been enhanced in the latest firmware. --- End quote --- That's great to hear. Please keep me updated! I'm in the market for a DSO and the Siglent is attractive. I just definitely don't want to see an XY mode like this: --- End quote --- Yes, to properly evaluate it it needs be videoed. The new FW I've mentioned is discussed here: https://www.eevblog.com/forum/testgear/siglent-sds1104x-e-in-depth-review/msg1555936/#msg1555936 It's not up on the Siglent websites yet but should be in the next few days. --- End quote --- Well I've managed to find a copy of the new SDS1004X-E series FW and the XY mode is dramatically improved. With lowest memory depth set it really flies for a cheap DSO. :) But unfortunately even just a 10s video is 30+MB on my phone so it's too big to post here. :( Tonight might be YT A/c setup night. :scared: Done. https://youtu.be/wUCdaVq3kL0 |
| borjam:
--- Quote from: tautech on May 21, 2018, 11:25:46 pm --- --- Quote from: chirality on May 21, 2018, 10:56:07 pm ---I'm curious, of all the <$2000 DSOs on the market as of 2018, which make/models do XY-mode the best (by best, I mean most analog-like)? Keysight? Tek? Rhode & Schwarz? Siglent? --- End quote --- In a few days we'll know how well the SDS1*04X-E XY mode has been improved as it's just been enhanced in the latest firmware. --- End quote --- Any plans for the two channel SDS1202X-E? Seems that despite belonging to the same "family" firmware development is diverging a lot. |
| tautech:
--- Quote from: borjam on May 22, 2018, 10:38:05 am --- --- Quote from: tautech on May 21, 2018, 11:25:46 pm ---In a few days we'll know how well the SDS1*04X-E XY mode has been improved as it's just been enhanced in the latest firmware. --- End quote --- Any plans for the two channel SDS1202X-E? Seems that despite belonging to the same "family" firmware development is diverging a lot. --- End quote --- The last 1202X-E FW was back in Jan so any improvements it supports that's been added to the 4ch X-E should follow in time. The divergence is due to the substantial additional functionality the 4 ch models provide and the need to get all that stuff right. |
| Navigation |
| Message Index |
| Next page |
| Previous page |