Siglent SDS7000A 3 and 4 GHz 12 bit DSO's

[tautech]

some system infos pictures and options,  not sure  if we could get most of them on purchase package ?   

Most options are free as part of an introduction promotional package until mid 2024
https://siglentna.com/news-article/siglent-sds7000a-introduction-promotion/
https://www.siglenteu.com/news-article/siglent-sds7000a-introduction-promotion/
https://int.siglent.com/info/detail-78.html

[Martin72]

some system infos pictures and options

Lots of options, much to my delight.
Including some that only lecroy usually has and that we need.
I think I'll have to talk to our purchasing department.

[coromonadalix]

loll       done  that  loll    still waiting for an quote answer

I'm impressed, still lot to discover,  still have to master the "unified 4 channels controls"  witch is not my forte 
Controls are fast and responsive to say the least.

But  another thing:
When you request the "auto setup",  you get an yes or no  popup asking if you still want to do it  ??   witch break a little bit,  the purpose of the auto setup ?? 
Unless it could be risky for the input stages ??  That should be removed  loll ... trying to see if it's an selectable / removable option  ??

Because the small SDS1204...    dont have this nag

[tautech]

But  another thing:
When you request the "auto setup",  you get an yes or no  popup asking if you still want to do it ??   witch break a little bit,  the purpose of the auto setup ?? 
Unless it could be risky for the input stages ??  That should be removed  loll ... trying to see if it's an selectable / removable option  ??

Because the small SDS1204...    dont have this nag

Good feature instead of just applying Autoset when you press it by mistake and it then changes all your scope settings. 
However if this has an Undo (and it should) no harm is done.

[KungFuJosh]

I also hate the autoset confirmation. The confirmation should be optional in the settings.

[hpw]

some system infos pictures and options,  not sure  if we could get most of them on purchase package ?   

Most options are free as part of an introduction promotional package until mid 2024
https://siglentna.com/news-article/siglent-sds7000a-introduction-promotion/
https://www.siglenteu.com/news-article/siglent-sds7000a-introduction-promotion/
https://int.siglent.com/info/detail-78.html

Would be a value, if the the Jitter-Kit is included with missing Jit-Kit specification as the Scope Jitter specification.

My 2 cents, otherwise 20K$ 

Hp

[tautech]

some system infos pictures and options,  not sure  if we could get most of them on purchase package ?   

Most options are free as part of an introduction promotional package until mid 2024
https://siglentna.com/news-article/siglent-sds7000a-introduction-promotion/
https://www.siglenteu.com/news-article/siglent-sds7000a-introduction-promotion/
https://int.siglent.com/info/detail-78.html

Would be a value, if the the Jitter-Kit is included with missing Jit-Kit specification as the Scope Jitter specification.

P12
https://int.siglent.com/u_file/download/23_12_27/SDS7000A_Datasheet_EN01B.pdf

[hpw]

some system infos pictures and options,  not sure  if we could get most of them on purchase package ?   

Most options are free as part of an introduction promotional package until mid 2024
https://siglentna.com/news-article/siglent-sds7000a-introduction-promotion/
https://www.siglenteu.com/news-article/siglent-sds7000a-introduction-promotion/
https://int.siglent.com/info/detail-78.html

Would be a value, if the the Jitter-Kit is included with missing Jit-Kit specification as the Scope Jitter specification.

P12
https://int.siglent.com/u_file/download/23_12_27/SDS7000A_Datasheet_EN01B.pdf

Well, as SDA7000A may looks like a bargain, with unknown performing figures, but how it compares to a WaveMaster 8000HD: Starting from $270,000 

[coromonadalix]

sadly  since there is calibration sticker / void,    i can not open the unit     they are on screw i did not saw on my 1st attempt  loll      near the foot

[tautech]

New firmware for SDS7000A models.

Version： V1.1.5.1
270 MB
https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS7000A_V1.1.5.1_EN.zip

Release notes
1. Cursor: Supported more cursors, and more flexible cursor combination
2. Fixed several bugs

Includes the previous version changes/fixes:
Supported new probes: Siglent’s SCP5030, SCP5030A, SCP5150, SCP5500
Measure: Optimized UX of Track and Trend; Supported to export measure data
Fixed several bugs
Slow response after pressing Math button
AWG: SCPI cannot set Load
Some bugs of USB2.0 compliance test
Some bugs of 100Base-TX and 1000Base-T compliance test
Some bugs on Options’ unlock

[ddrl46]

Is there any news about the higher bandwidth versions of the SDS7000A being released outside of China?

[tautech]

Is there any news about the higher bandwidth versions of the SDS7000A being released outside of China?

Zip.....not that I've asked yet.

I'll try to get a programme.

[tautech]

Is there any news about the higher bandwidth versions of the SDS7000A being released outside of China?

Zip.....not that I've asked yet.

I'll try to get a programme.

Nothing definitive, aiming for Q4 is the word.