Products > Test Equipment
ATTEN ADS1102CAL
<< < (5/7) > >>
Electro Detective:
Can you post your upload somewhere else not required to ok the use of cookies on some website  :scared:  so we can take a look? 

EDIT: Got it, thanks  :-+ 
It's an Atten .ADS file: ADS1000CAL_V100R003B01D01P31R16.ADS

--------------------

Version: 5.01.02.13  and 5.01.02.32 were the last Siglent CNL firmware updates available AFAIK

Working fine with the last update 5.01.02.32 that had the config .CFG file and instructions included from previous 5.01.02.13

We re-flashed the 1102 again yesterday just to be sure that this file combo works and confirm the previous info isn't a load of drawn out confused amateurish drivel and no problem  :-+

YOUR RISK if you choose to do so, as it was ours   >:D
 
Vlad399:
Hi!
Tell me please, how to remove a back cover of ADS1102CAL? I have turned off 4 screws on legs, but the back cover isn't removed. As where it is necessary to turn off still?
Thanks!
tautech:

--- Quote from: Vlad399 on March 14, 2018, 06:58:29 pm ---Hi!
Tell me please, how to remove a back cover of ADS1102CAL? I have turned off 4 screws on legs, but the back cover isn't removed. As where it is necessary to turn off still?
Thanks!

--- End quote ---
Welcome to the forum.

2 more under top handle ?
Vlad399:

--- Quote from: tautech on March 14, 2018, 07:39:37 pm ---
--- Quote from: Vlad399 on March 14, 2018, 06:58:29 pm ---

--- End quote ---
Welcome to the forum.
2 more under top handle ?

--- End quote ---

Oh, Thanks a lot! You are right, the key place has appeared under the handle.
SkullKill:
since all the links has changed, decided to post the updated links

Atten ADS1102CML firmware update to the Siglent SDS1102CNL firmware

this is a stock model. so NO memory mod done on this.

------------------BEFORE--------------------

Software Version: 3.01.01.21
Hardware Version: 6-41-2.0
Product Type: ADS1102CML
SerialNo.: ADS0000311XXXX

------------------AFTER--------------------

Software Version: 5.01.02.32
Hardware Version: 6-41-2.0
Product Type: SDS1102CNL
SerialNo.: ADS0000311XXXX

=========================

download page

http://www.siglent.com/ENs/prodcut-gjjrj.aspx?id=-1&tid=1&T=1

SDS1000CNL_UpdateCurrent Version: 5.01.02.32 | Published:2015-07-09Download
For SDS1072CNL/1102CNL
http://www.siglentamerica.com/USA_website_2014/Firmware&Software/firmware/SDS1000CNL_SSP_V100R005B01D02P32%20(3).rar

same firmware here
https://www.siglenteu.com/service-and-support/firmware-software/digital-oscilloscopes/
SDS1000CNL+ Series Digital Storage Oscilloscopes (Discontinued)
Firmware
SDS1000CNL Firmware - 5.01.02.32 (Release Date 07.09.15 )  Download
https://www.siglenteu.com/download/4251/

--------------------
firmware file that contain the config file...

SDS1000CNL_UpdateCurrent Version: 5.01.02.13 | Published:2014-09-26Download
For SDS1072CNL/SDS1102CNL

http://www.siglent.com/Uploadfile/file/20140926/SDS1000CNL_Update_EN.rar


Attached is the readme file, includes instructions for cfg update as well
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod