AU2019 Elektor LCR Meter - 50Hz - 2MHz (upgraded AU2013)

[xfd1001]

Hello,

Recently fraubrj / Elektor has released a new version of the AU2013 LCR meter the AU2019.
This time it seems the files are free to download! Files include BOM, gerbers, software and seem to even include the source code this time 

https://www.elektormagazine.com/news/double-treat-the-new-elektor-lcr-meter
https://www.elektormagazine.com/labs/remake-lcr-meter



Specs


Has anyone reviewed or build the new version yet?

[daisizhou]

Do you have plans to assemble it?

[zitoune]

Yes go to the project page https://www.elektormagazine.com/labs/remake-lcr-meter#comments

Schematics, gerber files, BOM, etc.. are available; there's also a kit that is more cost effective to buy as such rather than trying to source yourself all the parts.

[fps]

If it is assembled by yourself, calibration will be a problem

[dibro]

Calibration is no problem at all.
Download and read the manual to see how it's done.

[pope]

Very interesting. Has anyone actually built one?

[coromonadalix]

i was tempted by this project for a very long time


https://www.elektor.com/elektor-2-mhz-lcr-meter-kit


€799.00    outch  .....  1186$ CAD  ?  outch outch

but im a menber

€719.00   you save €80.00  ...............  mmm


And yes  the files where made public ...



Ther was in the past  Accuhard A101  an usb  lcr meter, sadly i missed the oppurtinity to get one of the last batch,  now   website is closed  ... at 200 USD at the time .. not going into 2Mhz  i think it was 100Khz or 200Khz  ...

[dibro]

Yep, I did.

[dobsonr741]

I find all downloads behind the paywall. Can you show the link to the free downloads?

This time it seems the files are free to download!

[JohanH]

I find all downloads behind the paywall. Can you show the link to the free downloads?

This time it seems the files are free to download!

It's not paywalled, you only have to register and login. Schematics and all is there. The "Updates from the author" section has latest files all in one place. Well, not entirely. Latest firmware is found in comments.

I was tempted to build this for a while, but the parts become too expensive.

[kripton2035]

I also found it too expensive from the beginning, and too complex too.

[fqahmad66]

Yes it is a 'Kit' Project. For accurate measuring, 1.0V test voltage is required. At lower test volt ranges, PS noise effects the accuracy.

[fqahmad66]

Finally built one...all hardware DIY.

[Sighound36]

I wonder how long before the Chinese have a copy for the usually Ali express plus a wee bit 

[fqahmad66]

A 2MHz LCR meter on AliExpress for cheap???

[coromonadalix]

loll you never know  loll  if they can  they will