| Products > Test Equipment |
| Banggood 50 ohm BNC feed-through terminator - a quick review |
| << < (8/15) > >> |
| alm:
Got a pair to have some extra around. One of them came apart while disconnecting a BNC cable. Guess they ran low on both thread locker and 100 Ohm resistors :P. |
| Gyro:
More likely, the assembly instructions called for three 150R resistors spaced at 60' and the poor, underpaid, assembler realised that he/she could save a few seconds by stacking two of them. |
| CJay:
At least they filed through the nickel or chrome to get to the brass underneath for soldering |
| Gyro:
Hence the time saving - and probably the loosening too. Less burrs on the threads to make it tight. |
| alm:
--- Quote from: Gyro on July 23, 2017, 09:47:06 am ---More likely, the assembly instructions called for three 150R resistors spaced at 60' and the poor, underpaid, assembler realised that he/she could save a few seconds by stacking two of them. --- End quote --- Unlikely in my opinion, given the earlier pictures that showed two 100 Ohm resistors at 180° spacing. |
| Navigation |
| Message Index |
| Next page |
| Previous page |