Author Topic: Battery resistance meter YR1035+ serial port mod + software  (Read 747 times)

0 Members and 1 Guest are viewing this topic.

Offline SairusTopic starter

  • Contributor
  • Posts: 42
  • Country: by
Battery resistance meter YR1035+ serial port mod + software
« on: October 12, 2024, 10:02:58 am »
Hi there.
Recently I play with battery resistance meter YR1035  from YAOREA (pretty useful tool for its price). Then I disassemble it and find something interesting.
2399675-0
By design it have ability to communicate with PC by using UART-USB bridge but IC is not populated.
2399679-1
After some research I found that IC is CP2102 I ordered cheap module as parts source.
2399693-2
Then I take all unpopulated parts from module and instal it to my unit.
2399697-3
Success now YR1035  can connect to PC. After connecting it send data by itself.

 To use this data I write simple software.
2399701-4

Features:
• Displaying of current readings.
• Ability to keep a log of received readings.
• Setting up the method of recording data in the log.
• Ability to save data to a CSV file.
• Setting up colors and OBS mode.
• Settings save after closing ap p lication
• Embedded documentation (russian and english)

Video
https://www.youtube.com/embed/LuBJ04A4zaM

File link: dropbox.com/scl/fi/0kgq076osb7zf3xxnxeaf/YR1035.exe?rlkey=cnbjk3hmpvoi4vmyd8k8pqt2x&st=7xco6kzj&dl=0
or https://drive.google.com/file/d/15RiIxyQN5sFVREX_wV8IGdXL4w3nX4p0/view?usp=drive_link
« Last Edit: October 12, 2024, 03:29:29 pm by Sairus »
 
The following users thanked this post: oPossum, Kean, Eltax1693, DaneLaw, Wertyuud

Offline xtech

  • Regular Contributor
  • *
  • Posts: 83
  • Country: pl
Re: Battery resistance meter YR1035+ serial port mod + software
« Reply #1 on: October 12, 2024, 11:32:27 am »
Nice, thanks for sharing
 

Offline SairusTopic starter

  • Contributor
  • Posts: 42
  • Country: by
Re: Battery resistance meter YR1035+ serial port mod + software
« Reply #2 on: October 12, 2024, 01:07:05 pm »
Logging have three modes:
  • All – all data is written.
  • By time interval – recording at regular intervals (interval can be set in 1 second increments).
  • Lock mode – one-time recording of stable values (you can enable a sound notification about successful recording in the table). Very useful if you need ranged bunch of bateries by voltage or internal resistance just measure then analyse log.

https://www.youtube.com/embed/IrXo85dHeKU?si=iYM4-_i4YK9pQLFX

 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf