Products > Test Equipment

Battery resistance meter YR1035+ serial port mod + software

(1/1)

Sairus:
Hi there.
Recently I play with battery resistance meter YR1035  from YAOREA (pretty useful tool for its price). Then I disassemble it and find something interesting.

By design it have ability to communicate with PC by using UART-USB bridge but IC is not populated.

After some research I found that IC is CP2102 I ordered cheap module as parts source.

Then I take all unpopulated parts from module and instal it to my unit.

Success now YR1035  can connect to PC. After connecting it send data by itself.

 To use this data I write simple software.


Features:
• Displaying of current readings.
• Ability to keep a log of received readings.
• Setting up the method of recording data in the log.
• Ability to save data to a CSV file.
• Setting up colors and OBS mode.
• Settings save after closing ap p lication
• Embedded documentation (russian and english)

Video
https://www.youtube.com/embed/LuBJ04A4zaM

File link: dropbox.com/scl/fi/0kgq076osb7zf3xxnxeaf/YR1035.exe?rlkey=cnbjk3hmpvoi4vmyd8k8pqt2x&st=7xco6kzj&dl=0
or https://drive.google.com/file/d/15RiIxyQN5sFVREX_wV8IGdXL4w3nX4p0/view?usp=drive_link

xtech:
Nice, thanks for sharing

Sairus:
Logging have three modes:

* All – all data is written.
* By time interval – recording at regular intervals (interval can be set in 1 second increments).
* Lock mode – one-time recording of stable values (you can enable a sound notification about successful recording in the table). Very useful if you need ranged bunch of bateries by voltage or internal resistance just measure then analyse log.
https://www.youtube.com/embed/IrXo85dHeKU?si=iYM4-_i4YK9pQLFX

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod