| Products > Test Equipment |
| Battery Simulator / Energy Usage Data Logger/Monitor |
| << < (2/2) |
| pdenisowski:
--- Quote from: Steve77 on July 22, 2023, 09:21:49 pm ---Paul, Sorry to comment on such an old thread, however, that was one fantastic presentation. One of the best I have ever seen on a piece of test equipment. I think you just altered my budget for my battery operated project. --- End quote --- Don't ever be sorry to leave comments like those :) - thanks! |
| mdredmond:
--- Quote ---Don't ever be sorry to leave comments like those --- End quote --- @pdenisowski What would be the best way to obtain good data to use for the battery simulator? The NGM looks like something we need and it's in budget. I am working on some sleepy devices that have occasional fairly high current needs (>300mA) and the current plan is to use two Energizer lithium primary cells. Is the data in this datasheet sufficient to model the batteries? https://data.energizer.com/pdfs/l91.pdf |
| pdenisowski:
--- Quote from: mdredmond on August 14, 2023, 01:04:15 am --- --- Quote ---Don't ever be sorry to leave comments like those --- End quote --- @pdenisowski What would be the best way to obtain good data to use for the battery simulator? The NGM looks like something we need and it's in budget. I am working on some sleepy devices that have occasional fairly high current needs (>300mA) and the current plan is to use two Energizer lithium primary cells. Is the data in this datasheet sufficient to model the batteries? https://data.energizer.com/pdfs/l91.pdf --- End quote --- The datasheet should be sufficient. You could measure the relevant quantities yourself as you discharge the batteries, but I would imagine the manufacturer has done this carefully / rigorously and that the datasheet numbers represent a large number of measurements (i.e. they tested lots of batteries). |
| mdredmond:
Paul, one more thing... Is the NGM as appropriate for this problem as a Source Measure Unit would be? Something like the NGU? Either is a lot of money and I want to get it right the first time. Thanks! |
| pdenisowski:
--- Quote from: mdredmond on August 14, 2023, 12:44:39 pm ---Paul, one more thing... Is the NGM as appropriate for this problem as a Source Measure Unit would be? Something like the NGU? Either is a lot of money and I want to get it right the first time. --- End quote --- They both should be fine for battery simulation - it really depends on what your specific needs are and what else you might use it for. Incidentally, I also did a video about the NGU |
| Navigation |
| Message Index |
| Previous page |