Products > Test Equipment

bench multimeter for someone learning

<< < (19/22) > >>

BillyO:

--- Quote from: bdunham7 on March 28, 2023, 06:30:35 pm --- how does not having it do so make the meter 'unsafe'?

--- End quote ---
I have worked in many noisy environments where the feeble squeak from a Fluke (or other DMM) would not be heard unless it was strapped to my ear instead of the ear-plugs that would need to be worn there.  Having a big flashy display would be handy in those cases.  So maybe not a whole lot safer, but definitely useful and convenient which could translate into a bit safer in some cases.

shapirus:

--- Quote from: bdunham7 on March 28, 2023, 06:49:00 pm ---But I doubt Fluke is going to lose market share over it.

--- End quote ---
They won't lose their market share regardless of what they sell, provided that they still offer their warranty, support and don't deprecate the products in the following 30 years.

shapirus:

--- Quote from: Arslan John on March 30, 2023, 07:16:25 am ---Most of people don't know how to select the best multimeter for bench testing if you also want to know, then here is the magic https://multimeterworld.com/best-dc-clamp-meter-for-automotive/

--- End quote ---
At first, this post looked like an AI-generated to me, but then, it is so out of context that I'm unsure.

tggzzz:

--- Quote from: shapirus on March 30, 2023, 07:54:57 am ---
--- Quote from: Arslan John on March 30, 2023, 07:16:25 am ---Most of people don't know how to select the best multimeter for bench testing if you also want to know, then here is the magic https://multimeterworld.com/best-dc-clamp-meter-for-automotive/

--- End quote ---
At first, this post looked like an AI-generated to me, but then, it is so out of context that I'm unsure.

--- End quote ---

All his posts are to a single website.

The "How to test lithium battery with multimeter? An Ultimate Guide" page contains

--- Quote ---Once you have prepared the battery for testing, you can connect the multimeter to the battery. Then you have to do this:
    Turn off the multimeter and set it to measure voltage (V).
    Connect the negative (-) lead of the multimeter to the negative (-) terminal of the battery.
    Connect the positive (+) lead of the multimeter to the positive (+) terminal of the battery.
    Turn on the multimeter and set it to measure voltage (V). [tggzzz: you need to set voltage before connecting, to avoid the accidentally setting it to current]

Set the Multimeter Readings for Lithium Batteries

When testing a lithium battery with a multimeter, you must set the readings accordingly. For most lithium batteries, the following settings should be used:

Voltage (V): 12.8V – 13.2V
Current (A): 0.1A – 5A
Resistance (Ω): 0Ω to infinity
[tggzzz: all bollocks, of course]

--- End quote ---

So yes, dangerous ChatGPT rubbish.

Reported to moderator.

alm:

--- Quote from: tggzzz on March 30, 2023, 08:10:44 am ---So yes, dangerous ChatGPT rubbish.

--- End quote ---
Link farms containing nonsensical electronics related texts that would show up in Google searches existed long before ChatGPT.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod