| Products > Test Equipment |
| BK2190E Oscilloscope Stay in the on screen. |
| << < (4/6) > >> |
| arnoudvh:
The reset worked for me! Great! Of course... after I disassembled the whole scope to check all wire connections, etc... (hw guy...) :P I guess I should update the firmware - or is that going to risk another boot-up hang? |
| tautech:
--- Quote from: arnoudvh on September 29, 2023, 04:40:10 pm ---The reset worked for me! Great! Of course... after I disassembled the whole scope to check all wire connections, etc... (hw guy...) :P I guess I should update the firmware - or is that going to risk another boot-up hang? --- End quote --- Welcome to the forum. FW updates never brick scopes. If you used the latest USB recovery method you should already have the latest FW version installed, V6.01.01.25 |
| arnoudvh:
I actually have the BK 2190D - where can I find the latest firmware for that? I have 5.01.02.22R5. Thx!! |
| tautech:
--- Quote from: arnoudvh on September 29, 2023, 09:30:29 pm ---I actually have the BK 2190D - where can I find the latest firmware for that? I have 5.01.02.22R5. Thx!! --- End quote --- BK would be your first port of call. |
| arnoudvh:
I forgot to mention that the BK site doesn't list Firmware - neither for D or E model - links: https://www.bkprecision.com/products/discontinued/2190d https://www.bkprecision.com/products/oscilloscopes/2190E Kind of strange. But I saw you mention (in this post: https://www.eevblog.com/forum/testgear/bk2190e-stay-in-the-on-screen/msg4406332/#msg4406332:~:text=Siglent%20Distributor%20NZ.-,Re%3A%20BK2190E%20Oscilloscope%20Stay%20in%20the%20on%20screen.,-%C2%AB%20Reply%20%231) that: "2190E is a SDS1102CNL+ but at glance the BK recovery package appears identical to the CNL+ one from Siglent." So I was wondering if anybody knows if there is also a package at for the BK 2190D in there: https://siglentna.com/service-and-support/firmware-software/digital-oscilloscopes/ Thanks! |
| Navigation |
| Message Index |
| Next page |
| Previous page |