Products > Test Equipment
Bluetooth (not BLE) packet trace capture
(1/1)
bson:
I'm on the hunt for a cheap and simple tool to capture Bluetooth classic packet traces.  Not BLE or I'd just use the $25 Adafruit nRF51 based sniffer.  Only really interested in high-level protocols, more specifically determining why a particular BT device fails to connect to a car head unit.  So I imagine a simple and cheap solution is a sniffer (ISM band SDR based, or PC host based if the BT radio can be put into promiscuous mode) that captures and dumps packets to a pcap file to look at in wireshark, not unlike what one might do with a crude tool like tcpdump.  I don't really need precise timestamping, real-time capture and view, compliance verification, etc etc.  Just dump the traffic to a file then filter and decode offline.  I can even set up a controlled environment where there's guaranteed not to be any other BT radios.  This is pretty much a one-off so I don't really see much need to spend thousands on it.  Help!
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod