Products > Test Equipment

Brymen 869S vs EEVblog BM786?

<< < (4/5) > >>

ElectricPower:

--- Quote from: BILLPOD on December 27, 2022, 06:56:38 pm ---ElectricPower, are the probes in the last picture what came with the meter?
They look like Probemasters. :scared:

--- End quote ---
Thats right. That is Probemaster. I bought two sets of Probemaster for my two Brymen meters. But the probes that came with the BM786 was actually wery good. Soft silicone leads, high quality :)

ElectricPower:
Some first impressions:

1. The BM869S has a little better display. When backlight is on the numbers on the BM786 is uneven. Not bad at all, but BM869 has a little better display.

2. the wheel is easyer to turn on BM786 than BM869S. BM869S is more firm.

But i have not tested the BM786 more than that. This is just my first impressions out of the box :)

ElectricPower:
One question:

Wich of these meters should i choose when i want to measure wery low current? Let's say under 10-50 uA (micro ampere)? Is it even possible?

J-R:

--- Quote from: ElectricPower on December 27, 2022, 09:16:01 pm ---One question:

Wich of these meters should i choose when i want to measure wery low current? Let's say under 10-50 uA (micro ampere)? Is it even possible?

--- End quote ---

This is eyes-closed easy, both have 0.01uA resolution.  I ran both through the full uA ranges and they are basically identical.

Even at the extremes, say for example 0.05uA, both were accurate to within 0.01uA.  At 50uA, I would say you could easily trust both to within 0.1uA.

ElectricPower:

--- Quote from: J-R on December 28, 2022, 01:29:54 am ---
--- Quote from: ElectricPower on December 27, 2022, 09:16:01 pm ---One question:

Wich of these meters should i choose when i want to measure wery low current? Let's say under 10-50 uA (micro ampere)? Is it even possible?

--- End quote ---

This is eyes-closed easy, both have 0.01uA resolution.  I ran both through the full uA ranges and they are basically identical.

Even at the extremes, say for example 0.05uA, both were accurate to within 0.01uA.  At 50uA, I would say you could easily trust both to within 0.1uA.

--- End quote ---
Thanks :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod