Products > Test Equipment
Brymen BM789
<< < (58/81) > >>
EEVblog:
FYI

--- Quote ---78608 version is only to enlarge allowance range for OHM hardware offset to reduce production failure rate. It does not affect meter performance.
--- End quote ---
Fungus:
Somebody just opened a can of worms...  :popcorn:

Antrus:
Found another annoying thing. In the video on YouTube, and checked it myself. In the region of 650 ohms and 6500 ohms, the multimeter cannot measure resistance in automatic mode. In firmware 78908-78910.
joeqsmith:

--- Quote from: Antrus on August 05, 2022, 03:07:29 pm ---Found another annoying thing. In the video on YouTube, and checked it myself. In the region of 650 ohms and 6500 ohms, the multimeter cannot measure resistance in automatic mode. In firmware 78908-78910.

--- End quote ---

I was able to replicated this with 08 and have contacted Brymen.   
NoMoreMagicSmoke:
What's the symptom?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod