Products > Test Equipment

Brymen BM829s beep volume

<< < (4/4)

WackyGerman:
Well , I was so happy that my Greenlee DM 830 ( similar to the BM829S ) has such a loud beeper   :-DD . In loud enviroments it is really helpful . For a lab it is too loud . It is more suitable for rugged field use than a lab . But it is a really good solid multimeter , built like a brick .  :-+ :-DMM . A little more helpful would be an option to change the frequency . The buzzer of the alarm systems on ships have the same frequency like the multimeter so when an alarm occurs you cannot hear the multimeter  :-//

sfs1:

--- Quote from: Kean on March 25, 2019, 05:54:37 am ---For a less invasive solution, maybe inserting a semi-conductive material between one of the springs and the piezo contact?
Something like a small piece of black conductive foam, or some other carbon impregnated material.

--- End quote ---

Thank you for the suggestion. I rummaged throgh my parts storage and found two small pieces of very light and thin esd foam which measured around 15 kOhm. Works perfectly.

Oleksii:
A 10 kOhm pill inserted :)
Can be easily removed when needed.
This way is much more comfortable to use the beeper function.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod