Products > Test Equipment
Brymen BM869(867) alternative software.
<< < (14/18) > >>
Scotty17819:
Thanx Sairus for your excellent work.

I've modified the interface using a 10F320 instead of the 12F683. Teamed with a PL2303HX-cable it works great on my BM867s.

Furthermore I've created a test board that adds a BTM222 bluetooth module to the interface. When using a terminal program I can successfully receive the raw data from BM867s on the notebook. Unfortunately the DMM SW 1.03 doesn't connect. Looks like it cannot open the serial port.
acid3:
Hello
I've just want to play with this soft and DIY cable but I've got this.

Downloading , the same version I have, not helped.


Sairus:

--- Quote ---Hello
I've just want to play with this soft and DIY cable but I've got this.
--- End quote ---
DOUHHHH  :o I forgot to upload new version. |O
Fixed. You can download new.
acid3:
Thanks a lot !
ElectronicCat:
I know you have previously stated that you will not open source this software, but would you at least consider making documentation on the protocol analysis available and/or some of the key algorithms from the software?

The main reason I ask is that I would like to develop an (open source) application for Linux for interface/logging with the 867/869, as I haven't seen anything other than Windows applications available yet.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod