Products > Test Equipment

Brymen BM869(867) alternative software.

<< < (17/18) > >>

Stefan3v:
Thanks Sairus and sorry for blaming you. Sairus DMM 1.04 is OK with Arduino UNO.
The serial port connected to the LEONARDO USB uses CDC (communications device class) to simulate UART functionality.

Many thanks!

Giox040:
Hi Sairus!
Your software is really interesting and I Thank You for making it available.

I'm fine-tuning the interface I've built around an Attiny85for my new BM869S, in case you are planning some upgrade, please consider the enlargement of the "Time" column of the login; in my PC I can see the date, hours and minutes but the seconds are truncated (even more than in the image of the previous post).

Furthermore, it would be convenient for the configuration parameters to be saved on file, instead of inserting them each time the program is started.

Thanks a lot!

radiolistener:

--- Quote from: IanB on September 25, 2016, 05:40:45 pm ---This is a technical forum. Downloading source code is no different than downloading a circuit schematic, PCB layout or B.O.M.

I would hesitate to run a downloaded executable however it was delivered.

--- End quote ---

you're right it's not safe to run executables from unknown source. But there is down side of the coin. The author may not want to share some algorithm details, but can share executable which use it. For example, sometimes I don't want to share some signal processing code with my optimizations for which I spend a lot of time. I can share executable with obfuscation, but obfuscation leads to a false positive on antiviruses. So I decided not share these projects at all.

At a glance it looks that this is doesn't have sense. But in reality things are not so easy. Sometimes when you share some project as open source and it has good commercial perspective, you can catch some bad things. For example, you will find some peoples who use your code for commercial purposes and then they start to insulting you and will try to kick off your open source projects from the market.

I don't see the commercial perspective for this software, but this is the right of author to decide if he want to share source code or not.

Fungus:

--- Quote from: IanB on September 25, 2016, 05:40:45 pm ---This is a technical forum. Downloading source code is no different than downloading a circuit schematic, PCB layout or B.O.M.

I would hesitate to run a downloaded executable however it was delivered.

--- End quote ---

Source code can contain malware, too.

(If you think about it: That bad exe file has source code!)

Sairus:

--- Quote from: Giox040 on June 17, 2021, 04:46:38 pm ---Hi Sairus!
Your software is really interesting and I Thank You for making it available.

I'm fine-tuning the interface I've built around an Attiny85for my new BM869S, in case you are planning some upgrade, please consider the enlargement of the "Time" column of the login; in my PC I can see the date, hours and minutes but the seconds are truncated (even more than in the image of the previous post).

Furthermore, it would be convenient for the configuration parameters to be saved on file, instead of inserting them each time the program is started.

Thanks a lot!

--- End quote ---

  In v1.07  :-DMM
-Time column enlarged.
-Now settings saved from last use no need to set them every time.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod