Author Topic: Enabling options for R&S test equipment  (Read 76549 times)

langlv and 1 Guest are viewing this topic.

Offline flyingfishfinger

  • Contributor
  • Posts: 29
  • Country: us
Re: Enabling options for R&S test equipment
« Reply #275 on: July 13, 2021, 11:53:01 pm »
Quote
No but BW is a HW option.

True, but we have the model which is unlockable with a key code - even when the HW supports it it still needs to be unlocked. In this case, is it possible to use methods from this thread? I'm unclear on how, if so.

R
« Last Edit: July 14, 2021, 12:04:39 am by flyingfishfinger »
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 2348
  • Country: pt
Re: Enabling options for R&S test equipment
« Reply #276 on: July 14, 2021, 07:58:04 am »
In this case, is it possible to use methods from this thread? I'm unclear on how, if so.

The required method is not in this thread.
 

Offline carver

  • Contributor
  • Posts: 13
  • Country: nr
Re: Enabling options for R&S test equipment
« Reply #277 on: July 14, 2021, 08:49:45 am »
yes, on ebay - these FPC/HW options, like FPC-B2 are sold as SW.

https://www.ebay.com/itm/363414986320
/carv
 

Offline Inside21

  • Contributor
  • Posts: 6
  • Country: ru
Re: Enabling options for R&S test equipment
« Reply #278 on: July 14, 2021, 02:05:36 pm »
and FPC-B3 (2-3 GHz) is SW option too
https://www.chipdip.ru/product/fpc-b3-2
« Last Edit: July 14, 2021, 02:08:29 pm by Inside21 »
 

Offline kendor

  • Newbie
  • Posts: 4
  • Country: ch
Re: Enabling options for R&S test equipment
« Reply #279 on: September 15, 2021, 10:06:14 pm »
Hello Pro's

I have a big problem... I used (https://github.com/rdelien/fsxx_keygen) to try to enable some options on my "FSEA 20".

I started entering all keys from 000, 001, .., 011. and it did enable FFT GSM EDGE, EMI receiver etc. however, upon entering the number of 012 it froze and when I rebooted the device now think it is an "FSIQ 3"|O
 Anyone has a hint on how I get my "FSEA" back?

thanks :)
 

Offline analogRF

  • Frequent Contributor
  • **
  • Posts: 792
  • Country: ca
Re: Enabling options for R&S test equipment
« Reply #280 on: September 15, 2021, 11:36:46 pm »
Is this one too new for these hacks?

No but BW is a HW option.

all options on FPC including BW are software enabled. The brochure clearly says so and it is actually highlighted as one of their selling points
 

Offline ps

  • Contributor
  • Posts: 31
  • Country: de
Re: Enabling options for R&S test equipment
« Reply #281 on: September 18, 2021, 02:30:57 pm »
I started entering all keys from 000, 001, .., 011. and it did enable FFT GSM EDGE, EMI receiver etc. however, upon entering the number of 012 it froze and when I rebooted the device now think it is an "FSIQ 3"|O
 Anyone has a hint on how I get my "FSEA" back?

The easiest way is to restore the backup of your FSEA hard disk and start over, skipping the 012 key.

Otherwise, you would have to keep trying keys until you come across one that converts the personality back to an FSEA.
 

Offline Qw3rtzuiop

  • Regular Contributor
  • *
  • Posts: 151
  • Country: de
Re: Enabling options for R&S test equipment
« Reply #282 on: September 18, 2021, 02:41:48 pm »
Hello Pro's

I have a big problem... I used (https://github.com/rdelien/fsxx_keygen) to try to enable some options on my "FSEA 20".

I started entering all keys from 000, 001, .., 011. and it did enable FFT GSM EDGE, EMI receiver etc. however, upon entering the number of 012 it froze and when I rebooted the device now think it is an "FSIQ 3"|O
 Anyone has a hint on how I get my "FSEA" back?

thanks :)

You should be able to change the identity via the attached service functions.
 
The following users thanked this post: YetAnotherTechie

Offline OH2LIY

  • Contributor
  • Posts: 41
  • Country: fi
Re: Enabling options for R&S test equipment
« Reply #283 on: September 19, 2021, 07:28:09 am »
Hi, all options are listed in OPTIONS.INI file (C:\R_S\INSTR\INI\OPTIONS.INI ,path may be wrong). Just remove option line...
3311386***; FSIQ
1124165***; W-CDMA BTS ANALYZER2331308513;
 ...

Ramppa
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf