Author Topic: [ask+help] rigol MSO1104Z signal protocol decoder  (Read 1806 times)

0 Members and 1 Guest are viewing this topic.

Offline e0ne199Topic starter

  • Regular Contributor
  • *
  • Posts: 131
  • Country: id
[ask+help] rigol MSO1104Z signal protocol decoder
« on: March 28, 2019, 10:54:48 am »
hello everyone...i just want to ask something about MSO1104Z before buying it..
anyway, as far as i know MSO1104Z can decode RS232,I2C and SPI but is there any way to decode signal like RS485 or CAN bus using PC software, if the oscilloscope doesn't have firmware to do it ?
i really need to know this before buying one because i am afraid that i can't use this oscilloscope to analyze signal protocols other than what this oscilloscope is capable of....
any feedback is really appreciated
 

Online hexreader

  • Frequent Contributor
  • **
  • Posts: 260
  • Country: england
Re: [ask+help] rigol MSO1104Z signal protocol decoder
« Reply #1 on: March 28, 2019, 12:21:27 pm »
Disclaimer - my opinion only...   ...but based on owning MSO1104z-s and DS1054z

Don't buy MSO - buy DS1054Z and a separate logic analyser. Cheaper and far better.

Quote
i am afraid that i can't use this oscilloscope to analyze signal protocols other than what this oscilloscope is capable of
You are right to be afraid - be very afraid.
« Last Edit: March 28, 2019, 12:27:25 pm by hexreader »
 
The following users thanked this post: Fungus

Offline Gege34

  • Contributor
  • Posts: 15
  • Country: fr
Re: [ask+help] rigol MSO1104Z signal protocol decoder
« Reply #2 on: March 28, 2019, 03:43:39 pm »
Generaly (I don't know a scope where it's possible) a scope provide limited number of protocols decoder and it's not upgradable by the user.
One possibility is to use Sigrok to decode alot of protocols (you can write your own) : .
Personally I have a Siglent SDS1104X-E and I use a DS-Logic Plus (base on sigrok software) when I need more complicated or not supported protocols.
 

Online Fungus

  • Super Contributor
  • ***
  • Posts: 16561
  • Country: 00
Re: [ask+help] rigol MSO1104Z signal protocol decoder
« Reply #3 on: March 28, 2019, 06:51:46 pm »
hello everyone...i just want to ask something about MSO1104Z before buying it..
anyway, as far as i know MSO1104Z can decode RS232,I2C and SPI but is there any way to decode signal like RS485 or CAN bus using PC software, if the oscilloscope doesn't have firmware to do it ?

Probably, but you're better off getting one of those $6 USB logic analyzers off eBay.

 

Offline ebastler

  • Super Contributor
  • ***
  • Posts: 6202
  • Country: de
Re: [ask+help] rigol MSO1104Z signal protocol decoder
« Reply #4 on: March 28, 2019, 08:13:34 pm »
i am afraid that i can't use this oscilloscope to analyze signal protocols other than what this oscilloscope is capable of....

You are afraid that this oscilloscope can't do what this oscilloscope can't do?
A valid concern, I'd say...  ;)
 

Offline e0ne199Topic starter

  • Regular Contributor
  • *
  • Posts: 131
  • Country: id
Re: [ask+help] rigol MSO1104Z signal protocol decoder
« Reply #5 on: March 28, 2019, 09:29:37 pm »
i am afraid that i can't use this oscilloscope to analyze signal protocols other than what this oscilloscope is capable of....

You are afraid that this oscilloscope can't do what this oscilloscope can't do?
A valid concern, I'd say...  ;)

lol i mean i would be unable to analyze other signal protocols than the ones built into this oscilloscope  :)

anyway thx for the response everyone  ;D
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf