Products > Test Equipment
Buying Keysight 34461A 6.5 Digit Bench DMM - Opinions?
<< < (7/8) > >>
nctnico:

--- Quote from: coromonadalix on March 30, 2024, 10:58:48 pm ---they should never put capacitance's checks in bench dmm ... and surely for theses low values ..  OR

--- End quote ---
Having a capacitance measurement in a bench DMM is fantastic. I wound't want a bench DMM without capacitor measurement. It saves needing another instrument on an already crowded bench if you just want to check whether the right capacitor has been put on a board. OR you are not mistaken putting a capacitor back which is next to 5 other capacitors you removed from a board earlier on.
Messtechniker:

--- Quote from: nctnico on March 30, 2024, 11:53:04 pm ---Having a capacitance measurement in a bench DMM is fantastic. I wound't want a bench DMM without capacitor measurement. It saves needing another instrument on an already crowded bench if you just want to check whether the right capacitor has been put on a board. OR you are not mistaken putting a capacitor back which is next to 5 other capacitors you removed from a board earlier on.

--- End quote ---

I agree. Which makes 2 now. :)
coromonadalix:
and you people forget they are time constant measurements to give you the capacitance,  not frequency related ...   not dcr esr  blah blah  ...   :palm:

man  my 189 do 50,000 uf
my gossen 30,000 uf ...         and i still don't thrust a part of it because of time constant,  maybe and removed cap could be measured, but in circuit  it's a no go

save yourself 100 buck and buy an de-5000, or even buy theses "avr based component testers" for 10-30$, they do a better job at it
Kleinstein:
In circuit capacitance measurements are always tricky. The only exception is an ESR test, when also doing a DC resistance test first.
There is relatively little extra effort to add the capacitance function - much if it reusues the ohms part. This way the protection for the ohms part is also active. In this respect the capacitance function on DMMs is often better protected than many dedicated LCR meters.
nctnico:

--- Quote from: coromonadalix on March 31, 2024, 06:51:09 am ---and you people forget they are time constant measurements to give you the capacitance,  not frequency related ...   not dcr esr  blah blah  ...   :palm:

--- End quote ---
99.9% of the times that doesn't interest me. I just want an indication of the value. 99.99% of the capacitors I use are ceramic.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod