Products > Test Equipment
Buying Keysight 34461A 6.5 Digit Bench DMM - Opinions?
Majorassburn:
This MAY be my next DMM purchase based upon your opinions, advice & experiences.
I'm open to alternatives in the "under $2,000" price range.
I eliminated the Fluke 8808A because of its limited functions (no capacitance, etc.).
Your input is much appreciated. TIA.
Demon Xanth:
The Keithly DMM6500 is a very comparable model.
Antonio90:
Its either the Keysight or the Keithley DMM6500. I don't think there is any real competition at that price point, unless you want to go lower in price and quality or higher in both.
Lstkartagi:
The 34465A seems to be going for around $1,860 before tax, so if $2k is the range, I would consider a 65A. The DMM6500s are good, exceptional on the 10V scale and 4 wire ohms, however IMHO a far less user friendly interface. Probably just depends in part on what you get used to or personal preferences in GUIs. Does TEquipment still give an EEVBLOG discount? Probably worth asking them anyway.
Antonio90:
Well, if you can get the 34465A under 2k it's a really strong contender too. Here in Europe is €1990 before tax, which is already over $2000. I't an overall improvement in every aspect of the 34461A which I have, and it's excellent. I'd like to get the DMM6500, but haven't been able to find it used for under €500 yet ;D
Navigation
[0] Message Index
[#] Next page
Go to full version