Products > Test Equipment

Calibrable el cheapo sig gens

<< < (2/2)

Aldo22:
I remember now, FY3200s has an option. See attachment.
I've never used it.

MarkF:

--- Quote from: coromonadalix on November 12, 2024, 01:09:30 pm ---The purposes is :   avoid sending or try sending  theses cheapos  to cal lab

And be extorted 160$ CAD for theses non calibrable Juntek jds2900  we have bought,  we bought them  just to help do things fast, under no certifications, field tests  under no precision / certifications

But we have intestinal fights,   where i say:  do not send theses !%%   and they insist to make them certified, certified in what ???


Now we have bought  few Rigols and lots of Siglent stuff,  3x  sdg 1000x,   3x ssg3000x,    scopes, spectrums,  etc ....  now more than enough to have certifiable equipment, and references ... if needed,  They don't go in the fields.

But the fight over theses 100$  "things"     ....  that's why i want to know cheap models who can be corrected in some ways if they are out of specs

I know not to expect miracles out of theses things,  mostly checkups (This is easy  loll, and happy with this)

thks

--- End quote ---

It seems to me that if "Management" insists on all your test equipment being calibrated, it would be better off getting rid of all the cheap stuff and use the money saved on their calibration to buy more of your better equipment that has a defined calibration path.

A perfect excuse to upgrade...   :-DD

tszaboo:

--- Quote from: coromonadalix on November 12, 2024, 01:09:30 pm ---The purposes is :   avoid sending or try sending  theses cheapos  to cal lab

--- End quote ---
You have a quality manager who wants to calibrate everything.
I see two options, you can either slap an "Uncalibrated" label on them. Or a "Scrapped label" on them and take them home for a nominal fee. And try not buying equipment without a cal certificate in the future.
I certainly prefer this situation over the situation where I have to fight to get essential test gear calibrated.

coromonadalix:
thks  i'm trying to get thoses  ......  far awayyyyy

but i was trying to find some  for easy portability, and be able to certify them   

witch sound at some point not plausible

i had in mind some of the uni-t   models    have to see if we can certifiy / calibrate them if needed

the Junteks jds2900  can not support shorts or very low impedance for long,  smd in them  burns,  dont know for others   low end ones

the TTi  Rigols Siglent   are okay, (half rack width)  but portability :(

Aldo22:

--- Quote from: coromonadalix on November 12, 2024, 04:19:55 pm ---the Junteks jds2900  can not support shorts or very low impedance for long,  smd in them  burns,  dont know for others   low end ones

--- End quote ---

FY3200 manual says: "All channels can work more than 60 seconds when the load is short-circuited."

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod