Author Topic: Picoscope 6000 series PSU  (Read 675 times)

0 Members and 1 Guest are viewing this topic.

Offline doktor pyta

  • Frequent Contributor
  • **
  • Posts: 271
  • Country: pl
    • RF Scientific
Picoscope 6000 series PSU
« on: March 22, 2016, 10:59:08 am »
Hi,
Is there any Picoscope 6000 series user here?
I have one without a power supply.
From the manual I know it should provide 12VDC, 4A, center positive.
From my observations it uses 2,1/5,5 DC power connector.

Should the PSU have output negative connected directly to the PE in the AC mains plug ? (I can buy PSU with and without this link).
Could someone send a closer picture of the original PSU?

Thanks!

Offline ADT123

  • Contributor
  • Posts: 48
  • Country: gb
    • Pico Technology
Re: Picoscope 6000 series PSU
« Reply #1 on: March 22, 2016, 01:27:54 pm »
Does this help?

https://www.picotech.com/accessories/miscellaneous/ac-adaptor-12-v

2 pin adaptors so not connected to ground.
Disclaimer:  I have worked for Pico Technology for over 25 years and designed some of their early oscilloscopes. 

Happy to answer Pico related questions when I have time but I am on eevblog in a personal capacity as electronics is a hobby.
 

Offline doktor pyta

  • Frequent Contributor
  • **
  • Posts: 271
  • Country: pl
    • RF Scientific
Re: Picoscope 6000 series PSU
« Reply #2 on: March 22, 2016, 02:16:44 pm »
Yes, thanks!
However a closer picture would also be useful :)
« Last Edit: March 22, 2016, 06:46:01 pm by doktor pyta »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf