Products > Test Equipment

Can the digital oscilloscope display G321EV be replaced with a different model?

(1/1)

daisizhou:
Hallo every one

This is one of my oscilloscopes. I have been using it for many years.
Recently I noticed a circular shadow in the center of the screen,It looks like the glue that bonds the LCD has aged.
I was wondering if there is a replacement for this model of LCD screen?Because the same model is very expensive

The LCD module model is G321EV. Is there any other model of LCD module that can be a perfect replacement?
Because if I buy the G321EV, after a period of use, the aging will appear again. I hope to completely solve the screen aging.

Fungus:
You need to separate the screen from the PCB and see if there's any numbers printed on it.

squadchannel:
Electrically, it should work with the same screen size, resolution, and controller.
But mechanically, I don't think it can be installed. It is better to purchase the same LCD panel or replace the polarizer.

daisizhou:

--- Quote from: squadchannel on August 13, 2024, 05:53:56 am ---Electrically, it should work with the same screen size, resolution, and controller.
But mechanically, I don't think it can be installed. It is better to purchase the same LCD panel or replace the polarizer.

--- End quote ---

As I thought, I initially mistakenly thought it was caused by the aging of the polarizer, but please see the following picture

The entire screen is made of a horizontal liquid crystal and a vertical liquid crystal bonded together.The horizontal direction is welded by zebra strips, and the vertical direction is conductive rubber.

I guess it's because the glue that bonds them together has aged.
If I buy the same model, I estimate that the same problem will occur again after a period of time, so I hope to completely solve this problem.

daisizhou:

--- Quote from: Fungus on August 13, 2024, 05:25:02 am ---You need to separate the screen from the PCB and see if there's any numbers printed on it.

--- End quote ---

It looks like the LCD module model is G321EV。
There is no point in buying the same model because the fault will reoccur over time, so I am looking for a perfect replacement model.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod