EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: zxq6 on December 23, 2021, 05:52:33 am

Title: Can the old probe P6245 modify to fit new MDO3x?
Post by: zxq6 on December 23, 2021, 05:52:33 am

I have 4 old probe P6245, but the new MDO34 is not support the interface.
If I can DIY to fit the new MDO 34?
the TAP1500 is too expensive，
and the interface transporter (TPA-BNC) is expensive too.
Thanks!