| Products > Test Equipment |
| Can you Hack the Hantek DSO2D15 to go to 200MHz? |
| (1/5) > >> |
| Merlin11:
I just bought a Hantek DSO2D15 on Amazon hopefully it will get here soon. Can this scope be modded to run at 200MHz? I have searched the forum and I can't seem to find the answer. Does anyone know what the latest firmware is? Is there a how to for doing a full backing up of this scope? Thanks |
| TomKatt:
I have zero experience with that scope (or Hantek products in general), but there is a lengthy thread on that series here - no idea what information is available, but I suspect that is where you'll find it. Just curious - given your questions, what led you to purchase that particular brand/model? Also it appears that scope is officially spec'd for 150MHz - do you really need the additional bandwidth? I guess anything 'more' is 'better', but if you don't actually need it, why bother potentially mucking it up if it turns out to be complicated? |
| Aldo22:
What do you mean by "hack"? Normally you hack a scope to upgrade to a better (existing) version if the limitation is in the software But there is no 200MHz version of the DSO2000. However, this does not mean that the DSO2000 cannot display/measure 200MHz. The amplitude is simply lower and it becomes a little unstable. The FAQ is here: https://www.eevblog.com/forum/testgear/hantek-dso2x1x-models-master-thread/ |
| Merlin11:
--- Quote from: TomKatt on July 08, 2024, 06:27:10 pm ---I have zero experience with that scope (or Hantek products in general), but there is a lengthy thread on that series here - no idea what information is available, but I suspect that is where you'll find it. Just curious - given your questions, what led you to purchase that particular brand/model? Also it appears that scope is officially spec'd for 150MHz - do you really need the additional bandwidth? I guess anything 'more' is 'better', but if you don't actually need it, why bother potentially mucking it up if it turns out to be complicated? --- End quote --- This scope seems to have the most bang for your buck and they seem to support it with new firmware updates so the scope seems to keep getting better. |
| Merlin11:
I have seen a hack tool to convert some slower Hantek scopes (70MHz 100MHz) to work at 200MHz. I would like to do the same with this new scope. |
| Navigation |
| Message Index |
| Next page |