Author Topic: Cant visualize signal on anritsu spectrum analzyer Anritsu MS2601A  (Read 423 times)

0 Members and 1 Guest are viewing this topic.

Offline NiaDebesisTopic starter

  • Frequent Contributor
  • **
  • Posts: 279
  • Country: it
Hi,

today I was working in the lab with my SA and after rebooting it every signal that I would put in input wasnt shown correctly, having like 89dbm offset but no f shift.
Now I see that the sram check says 'no check' and was wondering if this was my problem.
Because the signal is 'shown' but in the very top, like when you overload the frotend not scaling correctly.
Could be it?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf