Products > Test Equipment
Capturing a bunch of CAN-frames, where one might be missing - (SDS800X)
<< < (6/6)
Electro Fan:

--- Quote from: bobxyz on March 24, 2024, 11:43:44 pm ---The MCP2515 is a very common hobbyist CAN-to-SPI chip.  If you can program and are familiar with the Arduino environment, you could use a $20 CAN+Processor board, e.g. https://www.adafruit.com/product/5724, to decode the CAN stream live and generate a trigger for your oscilloscope.  This would let you zoom in on the analog waveforms.

--- End quote ---

https://youtu.be/MEkKPNr-KBk
eTobey:

--- Quote from: tautech on March 24, 2024, 08:44:30 pm ---If missing and like this ----- ---- it should be easy to trigger on where the frame should be.

--- End quote ---

You guys drove me nuts, saying i could find something i could not "see", but now i understand why. Problem is, you did not know, how that stream of frames (is my terminology right here?) really looks like. It is not a konstant frames every x us. So i could not use any "time and level" trigger.

As my problem seems to have dissappeared, id say, we can focus now on other topics/things, but if anyone has another good idea, your´re welcome. Using a board to trigger the scope was the best so far for me.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod