EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: wiredwrx on July 15, 2020, 01:06:43 am

Title: CMU 200 - Added TG
Post by: wiredwrx on July 15, 2020, 01:06:43 am

Since I work with repeaters, and radios, when I got the CMU 200, I felt it really needed a tracking generator, and missed not having one.  There are several available options out there, from using computers and software, to hardware addition.  I chose to order one from Ebay. (I ordered this one https://www.ebay.com/itm/CMU200-radio-services-monitor-source-tracking-generator-duplexer-measuring/142084270822?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 (https://www.ebay.com/itm/CMU200-radio-services-monitor-source-tracking-generator-duplexer-measuring/142084270822?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649))   When it arrived, I went about integrating the tracking generator into the unit.  Here is a link to some pics, and descriptions.  Hope people find it helpful and/or inspiring.

As an aside, the unit works perfectly now, and satisfies my needs. 

https://imgur.com/a/DiAA7Of (https://imgur.com/a/DiAA7Of)

Thanks,
Michael

Title: Re: CMU 200 - Added TG
Post by: Rollin Hand on July 18, 2020, 03:18:30 pm

sir I only see 1 picture of the cmu .
Can you extend the instalation information and performance Thanks.

Title: Re: CMU 200 - Added TG
Post by: wiredwrx on July 20, 2020, 02:05:27 am

I thought I fixed that.  Can you try the link in the post above and let me know.  It might be because I am logged into my own account, but I did test the link in a different browser and it seemed to work fine.

Actually, here it is again.

https://imgur.com/a/DiAA7Of

Title: Re: CMU 200 - Added TG
Post by: tv84 on July 20, 2020, 04:00:27 pm

It works fine for me.

Title: Re: CMU 200 - Added TG
Post by: tazmadman on October 17, 2024, 11:58:27 pm

Hi Wiredwrx i know this is a old post but is it possible to get a drawing of where the connections go between the cmu200 and the tracking generator please

Title: Re: CMU 200 - Added TG
Post by: tazmadman on October 18, 2024, 05:04:29 am

Or does anyone have a connection diagram to add one to the cmu200 please