Author Topic: Comparing modified BG7TBL (Galileo) to Trimble (GPS) GPSDO with HP 53310A MDA  (Read 630 times)

0 Members and 1 Guest are viewing this topic.

Offline kj7eTopic starter

  • Frequent Contributor
  • **
  • Posts: 911
  • Country: us
  • Damon Stewart
Its been a while since I pulled out the HP 53310A MDA so gave it some love the other day.  For the fun of it, I connected my modified BG7TBL GPSDO (u-blox NEO-M8T and Oscilloquartz 8663 OCXO) on the Galileo constellation to the reference input, and my second ZYT Trimble based GPSDO on the GPS constellation to the A input.  This was to compare the overall frequency deviation between the two units on separate systems.  Also to confirm my BG7TBL unit did not experience the documented low freq offset.

Happy to say, after a few hours of averaging the samples, no offset can be found.
Click to expand
2009582-0

Link to my modified BG7TBL;
https://www.eevblog.com/forum/testgear/bg7tbl-gpsdo-master-reference/msg2493726/?topicseen#msg2493726

BG7TBL Freq offset info;
https://blog.febo.com/?p=636

« Last Edit: February 19, 2024, 12:30:25 pm by kj7e »
 

Offline kj7eTopic starter

  • Frequent Contributor
  • **
  • Posts: 911
  • Country: us
  • Damon Stewart
Video Demo of the 53310A comparing the two GPSDO's including a short time laps accumulating samples.

 

Offline kj7eTopic starter

  • Frequent Contributor
  • **
  • Posts: 911
  • Country: us
  • Damon Stewart
Another comparison a week later...

Click to expand
2023760-0

 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf