EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: PowerNet on May 26, 2017, 03:12:46 am

Title: Continuity test with Fluke TL224
Post by: PowerNet on May 26, 2017, 03:12:46 am

Hi all,

So I got my TLK-225 kit and in it is the Silicon Fluke TL224 leads, which no dout a must have.

The issue is with the continuity test, I can get it to fail most of the time.

I have tested it with the standard lead that came with the 87V and works every time.

Has anyone else experienced this issue ?

Im using the TL224 lead with the TP175 probes.


Thanks

Title: Re: Continuity test with Fluke TL224
Post by: BMack on May 26, 2017, 05:02:04 am

I don't have that problem with my TL224s, I have several pairs of those leads as backups and have tested all. I use the TP2 and TL224s with my 87Vs. I have a set of the TP175 at work I can test.

Title: Re: Continuity test with Fluke TL224
Post by: retiredcaps on May 26, 2017, 05:07:14 am

You should be able to narrow down if one of the test leads/connectors is broken or not with another pair of good ones by mixing and matching everything.