Products > Test Equipment
count rising edges between cursers
(1/2) > >>
snarkysparky:
Would love to be able to dial my cursors to position and count rising edges between them.

I really need that capability in my oscope.   Using a sig 1104xe.   Now i export the waveform and open in octave and run a script i wrote.

Does any scope in low cost range do it?

thanks

csuhi17:
Rigol DHO900 and maybe the 800 also contain several types of counters.
you can find it in the description.
you can set two sources, one is zoom and the other is main.
I did not find an option for counting between two indicators.

I made a small video, in the process I managed to find a bug.
DHO900 series.

]
alm:
My most modern scope is about 20 years old, so I can't comment on which entry level scope you should look at, but what you're looking for is a scope that can gate a measurement between two cursors, and then a measurement like count number of edge transitions (just divide by two and add uncertainty of +/- 1 for just the rising edges). My 20 year old mid-range Lecroy scope can do it as part of the jitter & timing analysis option, and I think Siglent has taken a fair number of features from Lecroy, so it wouldn't surprise me if some modern Siglent scopes supported it, but I'm sure others will chime in for that.
2N3055:
SDS1000X-E has measurement gates. But no edge or pulse count measurements.
Scopes SDS2000X+ and up have  both...
TurboTom:
Rigol's DHO1k can easily do that and I'm pretty sure the DHO800 / 900 models as well since they untilize the same basic software package. Even the venerable DS1000Z was / is capable of this, though IIRC, the pulse / slope counting function had been added with some firmware update as the instrument matured. Whatsoever, now it's there.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod