Products > Test Equipment

Craftsman 82289 Multimeter MiniScope

(1/2) > >>

jmm418:
Hi
I just Bought a Craftsman 82289 scope meter for $50
it seems to be off when testing capacitors for example a 2.2uf is reading 1.5 i have another cheap meter that reads 2.2 when testing the same cap.
The AC & DC voltage reading is accurate
so i was thinking maybe there is a way to adjust it with a pot that's inside

I have done some research on it the meter seems to be made by extech and there is also a VOLTCRAFT version of it model GDM 704 & Extech 381265 they look the same as the craftsman

someone had taken the volt craft one apart there are a lot of pots inside i wouldn't know which one to adjust without messing it up maybe someone else would know or maybe it's best just to leave well enough alone

https://www-elektroda-pl.translate.goog/rtvforum/topic1678487.html?_x_tr_sl=auto&_x_tr_tl=en&_x_tr_hl=en&_x_tr_pto=wapp&_x_tr_hist=true

AVGresponding:
Are you using the same test leads with both meters? Some of the difference might be there, at least.

jmm418:
Hi
yes i tried the same leads in both meters but it did not make a difference.
maybe that's just the way the meter is made. or maybe it drifted i think it's almost 20yrs old
if i had the same one to compare it to then i would know.

mwb1100:
I just picked up a Craftsman 82289 miniscope as well (don't ask me why).  You got a better deal than I did.

According to the silkscreen the meter is a rebrand of the WENS33N.  Amazingly it turns out there's a page dedicated to the WENS33N (in Japanese):

  - https://hirokun.jp/av/wens_33n.html

  - google translated: https://hirokun-jp.translate.goog/av/wens_33n.html?_x_tr_sl=ja&_x_tr_tl=en&_x_tr_hl=en&_x_tr_pto=wapp

The person who wrote that info page also posted calibration instructions with schematics:

  - https://hirokun.jp/av/wens_33n_sch.pdf

So you might be in luck as far as getting the capacitance adjusted.  Please post details on how it goes!

jmm418:
Thanks for posting that. Now I just need to figure out how to get it apart.

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod