Author Topic: Decent Oscilloscope with VGA/HDMI out?  (Read 15649 times)

0 Members and 1 Guest are viewing this topic.

Online KungFuJosh

  • Super Contributor
  • ***
  • Posts: 2550
  • Country: us
  • TEAS is real.
Re: Decent Oscilloscope with VGA/HDMI out?
« Reply #50 on: August 19, 2023, 05:35:03 pm »
I wonder if a crossover ethernet cable would work directly from the PC to the scope?

If you need a crossover cable to connect a PC to your scope, you need either a new PC or a new scope :)

Almost all modern Ethernet interfaces support auto MDI-X, which allows most pairs of devices to communicate without needing a crossover cable.

I worked on Ethernet when Token Ring and FDDI were "competitors" to it, and I certainly don't miss having to color-code my cables so I could visually determine which ones were crossover cables (red seems to have been the convention).  One of my first troubleshooting steps when nodes wouldn't link up was to hold both plugs next to each other and check the order of the colors attached to the pins.

(sigh)  Good times :)

I know I'm dating myself with the crossover comment, but also, it's been noted that ethernet configurations on some of these scopes have been not always so modern. 😉
"Right now I’m having amnesia and déjà vu at the same time. I think I’ve forgotten this before." - Steven Wright
 

Offline tv84

  • Super Contributor
  • ***
  • Posts: 3303
  • Country: pt
Re: Decent Oscilloscope with VGA/HDMI out?
« Reply #51 on: August 19, 2023, 06:28:37 pm »
I know I'm dating myself with the crossover comment, but also, it's been noted that ethernet configurations on some of these scopes have been not always so modern. 😉

Sure, but usually what happens in these one-to-one connections is people continuing to have one of the endpoints with DHCP and expect it all to work...  :palm:
 
The following users thanked this post: Performa01, tautech, pdenisowski, KungFuJosh

Offline switchabl

  • Frequent Contributor
  • **
  • Posts: 445
  • Country: de
Re: Decent Oscilloscope with VGA/HDMI out?
« Reply #52 on: August 19, 2023, 06:32:32 pm »
I know I'm dating myself with the crossover comment, but also, it's been noted that ethernet configurations on some of these scopes have been not always so modern. 😉

I think the point is that it is enough to have one interface with Auto MDI-X. So unless you are into retro-computing, the scope side doesn't matter. And technically, I guess the answer is yes, since a crossover cable would still work (but isn't necessary).
 
The following users thanked this post: Performa01, pdenisowski, KungFuJosh

Online KungFuJosh

  • Super Contributor
  • ***
  • Posts: 2550
  • Country: us
  • TEAS is real.
Re: Decent Oscilloscope with VGA/HDMI out?
« Reply #53 on: August 20, 2023, 04:06:50 am »
Yeah, both good points. But you never know how old the computer in their lab is. 😉
"Right now I’m having amnesia and déjà vu at the same time. I think I’ve forgotten this before." - Steven Wright
 
The following users thanked this post: pdenisowski

Offline LinuxHata

  • Frequent Contributor
  • **
  • Posts: 380
  • Country: us
Re: Decent Oscilloscope with VGA/HDMI out?
« Reply #54 on: August 21, 2023, 08:57:55 pm »
As I find out, there's a small "upgrade" board for Hantek DSO2xx scopes, which adds HDMI output functionality. It costs about $40 in china. Already ordered, delivery in about 1 month, will keep you informed how it goes.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf