EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: NE666 on July 31, 2024, 04:25:57 pm

Title: Demo Data for Digilent's WaveForms Application (Analog / Digital Discovery)
Post by: NE666 on July 31, 2024, 04:25:57 pm

Greetings.

I've downloaded and installed the latest version of Digilent's WaveForms software (v 3.11.1) with the intention of evaluating it w.r.t. its LA/protocol decoding capabilities but, unless I'm missing something, "demo mode" doesn't provide the facility to generate any demonstration signals, nor are any example project or capture files included as part of the install.

Is there anyone out there owning a Discovery (either Analog or Digital variant would do) who would be kind enough to either;

a) point out where I am going wrong and guide me as to how to find/generate some test data for the Logic Analyser app ?
b) share with myself and the forum membership one or more exported Logic Analyser Acquisition files (*.Dwf3logicacq files) which I could import, of either I2C or SPI signals ?

Thanks in advance to anyone who can assist.

Title: Re: Demo Data for Digilent's WaveForms Application (Analog / Digital Discovery)
Post by: egonotto on July 31, 2024, 07:45:30 pm

Hello,

enclosed are the files from an AD2.

Best regards
egonotto

Title: Re: Demo Data for Digilent's WaveForms Application (Analog / Digital Discovery)
Post by: NE666 on August 01, 2024, 08:15:55 am

Thank you egonotto, much appreciated.

Title: Re: Demo Data for Digilent's WaveForms Application (Analog / Digital Discovery)
Post by: egonotto on August 05, 2024, 01:29:28 am

Hello,

enclosed is a 5 mH coil measured with the impedance analyzer with an AD3.
The .csv files are with comma as decimal separator (German)

Best regards
egonotto