EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: ballsystemlord on October 26, 2023, 03:14:03 am

Title: Determining the resistance of the DCA range.
Post by: ballsystemlord on October 26, 2023, 03:14:03 am

Hello,
Often higher end meters specify the burden voltage of the amps range. For example, 100mV/mA would give us a 100ohm resistor. But some meters only list the voltage drop as a < X.XXX number. Like the attached image.

How do I get/approximate the resistance of the meter's amperage ranges?

Thanks!