Products > Test Equipment
DG4000 - a firmware investigation
tv84:
Bootloader 00.06.02 attached.
KedasProbe:
I haven't updated it yet, I got this answer from Rigol:
--- Quote ---Generally speaking, we do not recommend the upgrade of the DG4000 firmware with series before 00.01.08.002 or the keyboard version before 05.01.
After upgrading the DG4000 using the bootloader program, the calibration data will be cleared, and the unit needs to be recalibrated. This cannot be completed on the customer side, as bootloaders are usually not directly developed for the customer's use.
However, if customers emphasize on upgrading the firmware, the unit will have to be returned for replacing the DG4000 mainboard. This will imply a charge of the service.
--- End quote ---
So I would lose calibration data when I load the bootloader, but not sure why the mainboard would need replacing.
Aleks Alekseev:
I can't update the firmware from version 1.09 to the modified 1.08. Can anyone give me an exactly working modified version?
tv84:
--- Quote from: Aleks Alekseev on September 10, 2024, 07:10:44 pm ---I can't update the firmware from version 1.09 to the modified 1.08. Can anyone give me an exactly working modified version?
--- End quote ---
Is your bootloader v06? If not, update the bootloader before trying the patched version.
Aleks Alekseev:
software version 00.01.09
fpga version 00.01.09
hard version 01.03
keyboard version 06.01
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version