Products > Test Equipment
DG4000 - a firmware investigation
(1/96) > >>
cybernet:
started dumping memory via JTAG on the DG4000 - no probs at all exact same layout as the DS2000's JTAG - aux 3,3V can be stolen from the header next to it if needed for jtag adapter.
cybernet:
JTAG Dump of a DG4062 - http://www.megafileupload.com/en/file/439251/dg4000-memdump-tar-gz.html
synapsis:
 :-+

My now that I'm finished working on my truck (10 days in Arizona summer), maybe I can finally play with the DG4000.
cybernet:
unless this is already public knowledge while looking for a way to change the model type, i stumbled over the secure code which is "2010" - this will enable the Test/Cal Submenu on the DG4062/FW 00.01.04
Sparky:
Here are links to DG4062 firmware (.GEL files), in case it is helpful to this effort :)

00.01.04.00.02 (date: 6/13/2012)

00.01.06.00.02 (date: 5/9/2013)

Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod