Products > Test Equipment
DIY Logic Analyzer Probe and Pods for Siglent (and LeCroy) scopes
oz2cpu:
YES it is to you.. I also packed a stribe og the special 86k6 resistors, as i said with this value (together with 120 ohm)
I get the most accurate trigger point
I think delay time, and match is much more relevant, but hey, let also get the triger point right if it is that easy
oz2cpu:
latest update of how to solder,
in your emails I refer to this page for latest info,
this way i only need to update one location
oz2cpu:
I just got an idea, had a bunch of DVI cables, and took a look inside,
wow perfect, 4 pair of perfect thickness wires, and 5 even thinner wires, perfect for electronic DIY :-)
50cm cables
oz2cpu:
and here is a little video
https://youtu.be/aK7hYr5Y-6Y
when more people get more used to working with the LA
I love to hear from you,
I recommend to turn deskew down to zero if you only use digital channels.
since a deskew setting will move all digitals, even if triggering on digital, and only showing digital,
this is think is a bit odd.
but ofcourse if you need to combine digital with analog, you need to dial it in,
my set need 13ns (50cm wires)
Jeff C:
Wow, great idea with the DVI cable! Unfortunately I just threw out about 20 50 foot long parallel cables at work. |O
I bet those would have worked out nicely. I guess I’ll have to see if there are any other unused ones still left >:D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version