Does the bandwidth limiter work on a hacked Rigol DS2072A?

[nbritton]

Does the 100 MHz bandwidth limiter work on a DS2072A that has been unlocked to 200 or 300 MHz?

[tautech]

Does the 100 MHz bandwidth limiter work on a DS2072A that has been unlocked to 200 or 300 MHz?

What makes you suspect it wouldn't?
An even higher BW DSO might also have additional BW limit options.

[nbritton]

Does the 100 MHz bandwidth limiter work on a DS2072A that has been unlocked to 200 or 300 MHz?

What makes you suspect it wouldn't?

Because the DS2072A leaves the factory as a 70 MHz scope.

[poida_pie]

on my hacked to 200MHz DS2072  (not A) with the trigger out fed into ch1 with 50 ohm termination I get
no BW  - 1.52ns rise time
100MHz BW limit - 3.2ns
20 MHz BW limit - 16.2ns

So I can say the BW limit works for me.

[tautech]

Does the 100 MHz bandwidth limiter work on a DS2072A that has been unlocked to 200 or 300 MHz?

What makes you suspect it wouldn't?

Because the DS2072A leaves the factory as a 70 MHz scope.

And why wouldn't it have the industry standard 20 MHz BW limit?

[tautech]

on my hacked to 200MHz DS2072  (not A) with the trigger out fed into ch1 with 50 ohm termination I get
no BW  - 1.52ns rise time
100MHz BW limit - 3.2ns
20 MHz BW limit - 16.2ns

So I can say the BW limit works for me.

Sounds right. 

[dadler]

"Hacked" is no different from unlocked-with-purchased-code in this context. The scope doesn't know it is "hacked". A code is simply entered, and the scope enables the options just as if they had been purchased.

And the BW limit works properly on my DS2072A.