| Products > Test Equipment |
| DS2000A Upgrade Utility |
| << < (37/52) > >> |
| synic:
--- Quote from: ReadNoise on September 12, 2014, 04:10:35 pm ---I used NCat to get the partial memory dump (address range likely varies between SW versions) from the scope, ran the rigup.exe included in the DS2000A upgrade utility, and it created the keys for my DS2072A. Sent the 200MHz key to scope with netcat again and 200MHz was unlocked. Total time start to finish was under 2 minutes. echo :SYST:UTIL:READ? 15441920,13262848 | ncat -i 1 SCOPE_ADDRESS_HERE 5555 > DS2072A_sdram.bin rigup scan DS2072A_sdram.bin > EC-keys.txt rigup DS2072 DS2072A_sdram.bin > Options.txt type Options.txt echo :SYST:OPT:INSTALL A_KEY_FROM_OPTIONS_WITHOUT_DASHES | ncat -i 1 SCOPE_ADDRESS_HERE 5555 --A --- End quote --- I can confirm the above worked for me as well. I also had the same version/model, and the scope just would not upgrade from the USB stick to the key dump firmware, but this method using ncat worked. |
| Gixy:
Dear all, Just received my brand new toy, MSO2072A. Unboxed it and connected it to the LAN, said the magic word ("xyzzy" for those who remember...) and turned it 5 minutes later into an MSO2302A. Thanks to all of you guys, you're great! |
| Gandalf_Sr:
@Jog Just enter the keys from the front panel. |
| CoolJazzTom:
Forum member Zombie28 had posted a link to the firmware file DS2000Update.GEL in thread "sniffing-the-rigol's-internal-i2c-bus". I tried downloading that file but was met with the message "the file you are trying to download is no longer available". I found a zipfile named DS2000UpdateGEL.exe on the net but when unzipped, it did not contain a file with the "GEL" extension. Can anyone tell me where I may find the latest DS2000Update.GEL file that allows me to recover the Rigol DS2072A system keys without needing to open up the unit for a memory dump (thereby voiding the warranty)? I really need the higher bandwidth but do not have the cash to shell out for a new o'scope. Thanks for the help. This thread rocks! |
| neslekkim:
If you read 4 post above yours, you will see something interresting.. You don't need to take apart your scope and void your warranty.. |
| Navigation |
| Message Index |
| Next page |
| Previous page |