| Products > Test Equipment |
| DS2000A Upgrade Utility |
| << < (13/52) > >> |
| Kappes Buur:
I am not sure if this will help you. After the unsuccessful attempt I uninstalled everything National Instruments related. I didn't have much success with the download from http://www.filedropper.com/ds2000aupgradeutility1001installer so I downloaded this one http://gotroot.ca/rigol/DS2000A_Upgrade_Utility_1_0_0_1_Installer.exe The 1001installer installs the app in C:\Program Files (x86)\DS2000A Upgrade Utility and installs NI visa540_runtime.exe during the setup procedure. Then running DS2000A_Upgrade_Utility.exe everything went smoothly. Just one question though, when you hook up your scope to the PC, you are using the rear USB-B connector ? On my scope the usb cable connector had to be pushed onto the scope connector with some force before it was seated properly. |
| BTO:
Hi Kapper Buur i read your post, My thoughts are as follows: 1. I agree with you about the filedropper.com link, it's a bit iffy and sometimes works and sometimes doesnt 2. i also Uninstalled Everything related to this entire solution before i installed this Work around solution 3. LOL i like the fact that you asked the question "Did i connect the PC to the Rear or Front USB of the scope" LOL... no offense taken though, it's cool this actually never occurred to me, YES i connected it to the Rear of the Scope as per the instruction Manual, Besides the Cable that came with the Scope is USB A - USB B the Rear of the scope is USB B, so if we think about it, i actually couldn't plug it into the wrong place anyway, because the computer is USB A but.. RESPECT goes to you for being thorough in your troubleshooting and assuming that i'm a new who doesn't know Jack LOL it's all good mate. on a serious note though. I'll try the same procedure on my laptop Maybe, (not sure why it would matter) , but maybe it's because my PC is a 64bit system i'll do your procedure on my laptop and see what happens and then i'll post my results. thanks mate be cool |
| Kappes Buur:
My system: Perhaps, for the installer to run properly you may need Microsoft .NET Framework 4.5.1, Microsoft Silverlight or some such. But madcrow would know for sure. |
| BTO:
Interesting... My System is... MS Windows 7 Ultimate 64bit OEM, Service Pack 1 Intel Core i7 2.8GHz RAM DDR3 16GB 1333MHz Net Framework is CONFIRMED to be 4.5.1 Microsoft Silverlight IS installed further to all this I have disabled Norton Internet Security , Spyware and Windows Firewall and Defender in light of the whole executable showing up as a false positive, it stands to reason that antivirus MAY be blocking the detection from the USB Ports it still didn't work Anyway, I"m now in the process of Reformatting and Installing Win 7 Pro 32bit on my laptop I'm that far into the process that it's just easier to go ahead and test it, Just in case. the O/S is installed I've just finished installed all Base Drivers I'm going to get back to it, and see how it goes, i should be able to check back in in about an hour or so and let you all know how i went with it. by the way how do i get into contact with madcrow HE/SHE has disabled their PM thanks for your patience with me in this matter, i really really appreciate it. |
| AndersAnd:
--- Quote from: madcrow on April 02, 2014, 09:53:33 am ---Changelog --- End quote --- Instead of uploading a .txt file you have to download and open before seeing the changelog, I would suggest just posting the changelog in the original post. Alternatively post the changelong to pastebin instead, so you can view it directly in the browser, and still be able to hit the download button at the top to download it in a .txt file. Example: http://pastebin.com/0LeULaSE I would also suggest adding the application name in the top of the changelog document so you can see what program it for. Before creating a pastebin you can set these options: Syntax Highlighting: Paste Expiration: [set time or chose never] Paste Exposure: [Public/Unlisted/Private] Paste Name / Title: There's a link at the bottom named "create a new version of this paste", but remember to enter a "Paste Name / Title:" every time you do that, otherwise the document will be named "Untitled". Including the version number in the document in the "Paste Name / Title:" would be nice. |
| Navigation |
| Message Index |
| Next page |
| Previous page |