Products > Test Equipment
DS2000A Upgrade Utility
<< < (16/52) > >>
BTO:

@madcrow
Just tried sending you a PM, check if you got it.

it was weird because
this time it said it was sent successfully

2 days ago it said something like you have block PM's or something to that effect

i guess it works now
anyway, check your inbox just in case to confirm.
be cool
AndersAnd:

--- Quote from: madcrow on April 14, 2014, 06:25:36 pm ---
--- Quote from: AndersAnd on April 14, 2014, 09:14:05 am ---Alternatively post the changelong to pastebin instead, so you can view it directly in the browser, and still be able to hit the download button at the top to download it in a .txt file.
Example: http://pastebin.com/0LeULaSE

--- End quote ---
Hey AndersAnd,

Thanks a lot for your great pastebin tutorial! I will definitely take your advice.
TBH, wanted to use a solution exactly like the one you've just showed me. But I did not know which hosting site can achieve this, so I just went with filedropper instead.

I replaced the link in the OP with the one you created.

--- End quote ---
Forgot to tell you, if you sign up and log into PasteBin you can edit or delete anything you paste. This way you can update the changelog for new versions and then you don't have to edit the link in the OP every time. You can also pate as a guest, but then you can't edit or delete anything you paste, so it's esier if you log in first.
Phil_Tech:
Hi and thanks for the upgrade utility - it is very well presented.

My installation is also stuck at the "Connect the DS2000A to your computer" stage.

I have a DS2072, SW version was 00.01.00, now 00.02.01 after running upgrade, serial DS2A....
- the CRO is configured for USB Device=computer
PC is Windows 7 64, no service pack
When I plug connect the CRO to my PC via USB - it shows up in device manager as:
-USB Test and Measurement Devices
--USB Test and Measurement Device (IVI)

I was originally running the portable version of the Upgrade Utility, I subsequently tried the Installer version - same problem not detecting the USB.
Also tried uninstalling & reinstalling the NI visa520runtime

Any suggestions?
regards, Phil (Melbourne Vic)
Phil_Tech:
UPDATE - as a very helpful contributor advised me via PM (thanks Teneyes), mine is not a DS2072A, just DS2072.
Is there an upgrade utility for this model as well?
AndersAnd:

--- Quote from: Phil_Tech on April 29, 2014, 07:09:30 am ---mine is not a DS2072A, just DS2072. Is there an upgrade utility for this model as well?
--- End quote ---
Yes, it's all explained in this very long topic: https://www.eevblog.com/forum/testgear/sniffing-the-rigol%27s-internal-i2c-bus/
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod