Products > Test Equipment
E36300 Series Programmable DC Power Supplies (E36311A, E36312A, E36313A)
<< < (47/54) > >>
nctnico:
BTW I found a good use for the 4th output channel. Currently I'm developing a USB powered gadget and the front USB connector is ideal to get 5V from  >:D
apblog:

--- Quote from: nctnico on October 06, 2018, 12:39:12 pm ---BTW I found a good use for the 4th output channel. Currently I'm developing a USB powered gadget and the front USB connector is ideal to get 5V from  >:D

--- End quote ---

Very creative!  :clap:  I hadn’t even though of using that for power.  Mine gives about 600ma before the voltage starts to sag.
HighVoltage:
600 mA is not bad, even enough to slowly charge the smartphone.

To Keysight:
Why not add a display option for the USB output details to test USB devices.


plurn:
Have not noticed it mentioned elsewhere yet but I have not really looked extensively. There is an 02 service note for E36312A and E36313A relating to "Compliance to EMC IEC61000-4-3 standard requires a ferrite core":

http://literature.cdn.keysight.com/litweb/pdf/E36312A-02.pdf
http://literature.cdn.keysight.com/litweb/pdf/E36313A-02.pdf

E36311A does not seem to have the same service note as of this time. Perhaps it is not applicable to this unit?
https://servicenotes.literature.keysight.com/litapp/SearchSN.do?method=openExternalSNSearch&prodNum=E36311A

free customer installable kit to address the issue.
Andrew:
Spotted a new IVI driver for this series of power supply which also adds support for new models...

2019-04-30 - 1.5.0.0 - Added SCPIs and model support of E36231A, E36232A, E36233A and E36234A.

The arrival of summer (northern hemisphere) signalling the start of the tech-show season and the prospect of new models. 8)

Add link: https://www.keysight.com/main/software.jspx?ckey=1669314&lc=eng&cc=US
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod