Products > Test Equipment
E4406A -- failed firmware update
<< < (3/4) > >>
KE5FX:

--- Quote from: picburner on September 12, 2022, 05:55:16 am ---The software you are looking for is called N7812A.
With foresight I had made a copy when it was still freely downloadable from Agilent website long ago. I can't post it here because the size exceeds 19MB.
I can send it via wetranfer if you want a copy. Send me the request in PM with your email.

--- End quote ---

You might consider sending it to Didier at ko4bb.com.  Sounds like it'd be very helpful to many E4406A owners.
giovannirat:
You can find this software (and other's) on web archive too.

https://web.archive.org/web/20220710044530/https://cal.software.keysight.com/

picburner:

--- Quote ---You might consider sending it to Didier at ko4bb.com.  Sounds like it'd be very helpful to many E4406A owners.
--- End quote ---
This is what I normally do with hard to find manuals and various instrument eprom dumps.
In this case it is software and for this reason I did not immediately put it on the ko4bb website.
However if I place it there, it would not be immediately available because it needs approval, for those who want it quickly there is the system proposed in the previous message.

While I was writing a new message arrived which solves the problem.
KE5FX:
It still seems to be posted at https://cal.software.keysight.com, but there is a note on the page saying it requires a license key.  Not clear if that applies to all of the applications or just the core TME environment.
nexus:
Were you ever able to run the N7800 software for your unit? Afaik it is license key restricted, even though you need a physical cal lab to use it properly. There are a lot of useful adjustments, however, that would could do even without cal gear if we could run N7800 apps for various instruments.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod