| Products > Test Equipment |
| East Tester ET5410 ET5420 ET5411 ET54 series - Software |
| << < (11/11) |
| DaneLaw:
You have the latest here for the East Tester E54xx series-. Package https://www.easttester-cn.com/uploads/DC-LOAD-software-V1.07-11.18.rar Online PDF files. PC Software user manual https://www.easttester-cn.com/uploads/95eefdab.pdf User manual ET5410/5411 (1ch) https://www.easttester-cn.com/uploads/ET5410-ET5411-Programmable-Single-DC-Electronic-Load-User-Manual.pdf ET5420 (2ch) https://www.easttester-cn.com/uploads/ET5420-Programmable-Double-DC-Electronic-Load-User-Manual-User-Manual.pdf |
| ptluis:
--- Quote from: w.v.s. on June 15, 2024, 08:42:56 am --- --- Quote from: ptluis on November 08, 2023, 02:26:08 pm --- --- Quote from: arielito on October 08, 2023, 11:38:42 am ---hello guys! I buy the last model dual load ET5420A+ and detect a fex of bugs in the firmware and contact the support of ET . this send me a hex file and a application to update the firmware but all in chinese. Have any of you ever updated the firmware? the software show all buttons in chinese or unreadable characters and i can't upgrade. this is the links sed by the suport of ET ET54A+_Boot升级流程English.pdf (452.96KB)查看/下载https://drive.263.net/link/fqukk0zII0snDzr/?link=fqukk0zII0snDzr ET54A+.2334.020(150V).hex (870.06KB)查看/下载https://drive.263.net/link/JYOohoRH93OYiX6/?link=JYOohoRH93OYiX6 ET54A+电子负载升级V1.05.rar (1.37MB)查看/下载https://drive.263.net/link/4XXX6M2F5pAvaie/?link=4XXX6M2F5pAvaie --- End quote --- links expired, did you download the files? if yes can you post them here? Btw, can you connect both channels in parallel without any problems? --- End quote --- Hello, we are currently trying to learn about the update process of the ET44XX and ET45XX lcr-meters. https://www.eevblog.com/forum/testgear/east-tester-et4410-desktop-lcr-meter/msg5542409/#msg5542409 I would like to do some comparisons with the ET54XX electronic load. Did anyone download that update files and could share them? --- End quote --- The user never posted or sent the files to me, so can't help you. One thing I advise all owners of these units is to check connection on the binding posts. Most of them come loose and if that's the case you will get voltage drop readings deceiving you on the real results. I own both ET5410A and ET5420A and they act defective because of that. After tight good all binding posts this units are working fine. |
| Tiedix:
Hi there, I own the EastTester ET5411 and have the same problem when trying to connect the ET4511 via USB/ com3 to a PC: "ET5410" do not match answer: "ET5411,V1.02.2034.029,09432030024,V1.11.2034.002" (there is no ET5411 in the search socket of the TestController SW). On April 30iest, 2023 you posted, that you succeeded in editing the IDstring. How did you do that? Your help would be greatly appreciated |
| HKJ:
--- Quote from: Tiedix on July 16, 2024, 09:55:15 am ---Hi there, I own the EastTester ET5411 and have the same problem when trying to connect the ET4511 via USB/ com3 to a PC: "ET5410" do not match answer: "ET5411,V1.02.2034.029,09432030024,V1.11.2034.002" (there is no ET5411 in the search socket of the TestController SW). On April 30iest, 2023 you posted, that you succeeded in editing the IDstring. How did you do that? Your help would be greatly appreciated --- End quote --- You find a definition file for simllar ET devices and this. #metadef #idString ET5411, #name East Tester ET5411 #handle ET5411 #port com This will only work if the file already contains #metadef statements and the defined profile basically match the device (This will often be the case with similar devices from the same manufacturer). There is ways to modify the actual definition conditionally based on the #metadef used as can be seen in a lot of the definition files. If a file do not have a #metadef, it is easy to add. Before the first line starting with # add #meta and somewhere before that add a #metadef, then other #metadef can be added before that. |
| Navigation |
| Message Index |
| Previous page |