EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: lazaj on June 17, 2022, 10:30:11 am
-
Hello,
I bought my EEV BM235 in 2017, since then no problems.
I haven't used it for a month, today I start using it and it seems to have a problem in continuity mode.
I tried several probes, change batteries ...
When I join the probes together, it show 4 Ohms and then the measurement slowly drops to 0.5 Ohms.
I did not have time to test the other functions.
Any advices.
Thanks.