« previous next »
Pages: [1]   Go Down

Author Topic: Disassembly of Rigol DM3058 and DM3058E  (Read 421 times)

0 Members and 1 Guest are viewing this topic.

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Disassembly of Rigol DM3058 and DM3058E
« on: April 30, 2024, 04:19:09 pm »
Previously, there were detailed photos of this device on this forum, but they are outdated. I'm posting photos of my dm3058e, I hope they will be useful or interesting to someone.
The device itself turned out to be quite pleasant to use. Noise at measurements of 5 ppm, more digits in the interface. A fairly low temperature coefficient of about 2ppm/K. A measurement is sent to the interface in slow mode every 0.5 seconds.
The Agilent command mode works crookedly enough.
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #1 on: April 30, 2024, 04:20:46 pm »
foto
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #2 on: April 30, 2024, 04:21:53 pm »
foto
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #3 on: April 30, 2024, 04:22:38 pm »
foto
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #4 on: April 30, 2024, 04:23:17 pm »
foto
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #5 on: April 30, 2024, 04:23:53 pm »
foto
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #6 on: April 30, 2024, 04:24:26 pm »
foto
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #7 on: April 30, 2024, 04:25:43 pm »
foto
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #8 on: April 30, 2024, 04:26:26 pm »
foto
Logged
 

Online NanitamuscenTopic starter

  • Contributor
  • Posts: 36
  • Country: ru
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #9 on: April 30, 2024, 04:28:16 pm »
The photos are voluminous, it does not allow you to upload more than two at a time. I did not upload it to other sites so that the photos would not disappear there.
Logged
 
The following users thanked this post: TurboTom

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 5939
  • Country: ca
Re: Disassembly of Rigol DM3058 and DM3058E
« Reply #10 on: May 01, 2024, 12:05:57 am »
thks
I'm surprised to see an adsp xxxxx  processor in there
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee